SP100FO Fixed-Flow OEM Peristaltic Pumps
Processing...

SP100FO Fixed-Flow OEM Peristaltic Pumps

Code: SP100FO
$72.00
SELECT Tubing Size (ID):
SELECT Tubing Material:
SELECT Motor RPM:
SELECT Enclosure:
SELECT Power Input:
Qty

Product Description

•••••

 
  • Flow rates from 0.06 to 5.6ml/min.
  • Clear plastic housing, acetal rotor assembly and four stainless steel rollers.
  • Select from silicone (low-cost), Tygon® A60; (long life) and Viton® (chemical-resistant) tubing options.
  • Compact size — 60 x 70 x 66 mm(W x H x D).
  • Shpg. Wt. 0.4 kg (0.9 lb).
  • OEM inquiries invited.
    		•   

    Download SP100FO Fixed-Flow Product Sheet (.pdf; 51KB).

    PERI PUMP FEATURES

    Fluid only contacts the tubing
    Self-priming
    Run dry without damage
    Pump viscous fluids and slurries


    SP100 Alternating Current(Vac) Pumps

    Motor RPM
    Voltage(ac)
    Amps(mA)
    Maximum Flowrates (mL/min)
    3.0mmID
    1.6mmID
    0.8mmID
    30
    115
    30
    5.6
    1.5
    0.5
    30
    240
    15
    4.67
    1.25
    0.42
    15
    115
    30
    3.3
    0.9
    0.3
    15
    240
    15
    2.75
    0.75
    0.25
    8
    115
    30
    1.5
    0.40
    0.16
    8
    240
    15
    1.25
    0.35
    0.13
    3
    115
    30
    0.65
    0.18
    0.06
    3
    240
    15
    0.54
    0.15
    0.05

    Flow rates listed are nominal and will vary depending upon fluid viscosity and back pressure. Specifications listed are for Norprene tubing. Silicone flow rates are approximately 10-20% higher, while flow rates withViton are slightly lower. Viton is not recommended for use with the 30 rpm motors.
    **3mm Viton tubing is NOT recommended for use with the 30rpm motor. See SP100FOHD pumps.