3mm Viton tubing is NOT recommended for use with the 30rpm motor. See SP100FOHD pumps.
- Flow rates from 0.06 to 5.6ml/min.
- Clear plastic housing, acetal rotor assembly and four stainless steel rollers.
- Select from silicone (low-cost), Norprene® (long life) and Viton® (chemical-resistant) tubing options.
- Compact size — 84 x 140 x 97 mm(W x H x D).
- Shpg. Wt. 0.9 kg (2 lbs).
- OEM inquiries invited.
PERI PUMP FEATURES
Fluid only contacts the tubing Self-priming Run dry without damage Pump viscous fluids and slurries
SP100FOC Pumps
| Motor RPM |
Voltage(ac) |
Amps(mA) |
Maximum Flowrates (mL/min) |
| 3.0mmID |
1.6mmID |
0.8mmID |
| 30 |
115 |
30 |
5.6 |
1.5 |
0.5 |
| 30 |
240 |
15 |
4.67 |
1.25 |
0.42 |
| 15 |
115 |
30 |
3.3 |
0.9 |
0.3 |
| 15 |
240 |
15 |
2.75 |
0.75 |
0.25 |
| 3 |
115 |
30 |
0.65 |
0.18 |
0.06 |
| 3 |
240 |
15 |
0.54 |
0.15 |
0.05 |
Flow rates listed are nominal and will vary depending upon fluid viscosity and back pressure.
Specifications listed are for Norprene tubing. Silicone flow rates are approximately 10-20% higher,
while flow rates with Viton are slightly lower. Viton is not recommended for use with the 30 rpm motors.
Reviews
There are no reviews yet.